|
Power Pallet Truck
WP-LPT15(AC)
3-phase AC drive motor
maintenance free
Lower lift cycle costs
Longer operating time between recharge
Regenerative braking
High efficiency and allows the acceleration and braking on slopes
Drive motor:KORDEL from Germany
Controller:ZAPI
Hydraulic motor: Imported from Europe
The Lpt15 benefits from Noblelift's design and engineering excellence.
Approved good acceleration enhances efficient pallet entry and exit to increase productivity. Nopolar Electronic-control is programmable for specific tasks or operator skill levels.
Smooth travel and lift combine with excellent controls to reduce product damage and increase productivity.
A heavy-duty 24-volt electrical system provides good travel and lift speeds.
High quality hydraulic pump assures very little noise,maximum efficiency and durability.
Drive unit is equipped with an electromagnetic brake that is spring applied and electrically release. Brake is activated by the control handle position. Ergonmic designed control handle with buttons for raising, lowering and horning.
Lift limit switch operates at maximum lift height to shut off pump motor.
With curtis electronic controller from Europe.
Small and light, used in limited space.
Excellent stability in operation even on the empty.
Conforms to EN1726 and EN1175-1
1KG=2.2LB 1INCH=25.4MM
| Identification |
1.2 |
Model of manufacture |
|
WP-LPT15(AC) |
| 1.3 |
Power supply(electric,diesel, petrol,gas,mains electric) |
|
electric |
| 1.4 |
Type of operation(hand,pedestrian,stand on,rider seated, order picker) |
|
pedestrian |
| 1.5 |
Capacity /rated load |
Q Kg |
1500 |
| 1.6 |
Load center distance |
C mm
|
600 |
| 1.8 |
Load distance |
X mm |
963 |
1054 |
| 1.9 |
Wheelbase |
y mm |
1217 |
1310 |
| Weights |
2.1 |
Weight(including battery) |
Kg |
286 |
| 2.2 |
Axle loadings laden
drive end/load end |
Kg |
760/1026 |
674/1112 |
| 2.3 |
Axle loadings unladen
drive end/load end |
Kg |
222/64 |
226/60 |
Wheels,
Chassis |
3.1 |
Tyres(rubber, Vulkollan, pneumatic, polyurethane) |
|
polyurethane |
| 3.2 |
Tyre size drive end |
mm |
Φ252x89 |
| 3.3 |
Tyre size load end |
mm |
Φ84x70/Φ84x93 |
Φ74x70/Φ74x93 |
| 3.4 |
Castor wheels(dimensions) |
|
Φ100x40 |
| 3.5 |
Wheels, number(x=drive wheel)drive end/load end |
|
1x -2/4 or 1x -2/4 |
| 3.6 |
Track width(front) drive end |
b10mm |
490 |
| 3.7 |
Track width(rear) load end |
b11mm |
360 |
490 |
| Basic Dimensions |
4.4 |
Lift height |
h3 mm |
120 |
| 4.9 |
Tiller height in neutrality position |
h14mm
|
1235 |
| 4.15 |
Fork height lowered |
h13mm |
85 |
75 |
| 4.19 |
Overall length |
l1 mm |
1590 |
1660 |
| 4.20 |
Length to front face of fork |
l2 mm |
440 |
| 4.21 |
Overall width |
b1 mm |
700 |
| 4.22 |
Fork dimensions |
s/e/l mm |
47/160/1150 |
47/160/1220 |
| 4.25 |
Overall fork width |
b5 mm |
520 |
650 |
| 4.32 |
Floor clearance, center of wheelbase |
m2 mm |
34 |
24 |
| 4.34 |
Working aisle with 800x1200 pallet lengthwise |
Ast mm |
1944 |
1976 |
| 4.35 |
turning radius |
Wa mm |
1480 |
1550 |
| Performance Data |
5.1 |
Travel Speed laden/unladen |
km/h |
5.0/5.2 |
| 5.2 |
Lifting speed laden/unladen |
mm/s |
27/35 |
| 5.3 |
Lowering speed laden/unladen |
mm/s |
42/27 |
| 5.8 |
Gradeability laden/unladen |
% |
5/8 |
| 5.10 |
Brakes |
|
Electric-magnetic |
| E-Motor |
6.1 |
Drive motor |
kw |
0.6(AC) |
| 6.2 |
Lifting motor |
kw |
0.8 |
| 6.3 |
Battery acc. To BS, no 1) |
|
no |
| 6.4 |
Battery voltage, norminal capacity K5 1) |
V/Ah |
2x12/80 |
| 6.5 |
Battery weight +/-5% |
Kg |
48 |
| |
Battery dimensions l/w/h 1) |
mm |
260/170/230 |
| Others |
8.1 |
Type of drive control |
|
MOSFET Control |
| 8.4 |
Sound level, at driver's ears |
dB(A) |
<70 |
| |
Turning angle |
° |
205 |
|
*)Load section lifted/lowered +55mm
**)Diagonal according to VDI+204mm | | 
粤公网安备 44010602003952号