The EKS 110 is the ideal truck for stockpicking
between the first and third levels.
The platform and load section can be
raised up to a height of 3000 mm. This
allows for picking up to a height of
4600 mm.
The counterbalance design allows a wide
range of load storage units to be raised
off the ground both longitudinally and
crosswise.
The load section is optionally available in a
walk-on design (with a pallet surround, if
required) or with auxiliary lift (without reducing
the residual capacity). The auxiliary
lift ensures that the picked goods can be
stored at an accessible height.
Other ergonomic and technical innovations
are included to make orderpicking
faster, easier and above all more economical:

Large storage areas on the battery cover

(optional) and below the control unit.

Extended operator platform width (optional).

Sensitive speed control.

Individual travel programs.

Clearly defined driver’s display.

AC drive system (24 volts).

Innovative AC Technology
Jungheinrich AC motors offer more power while at the same time reducing the running costs over the life cycle of the truck. The benefits include:
High levels of efficiency and excellent
energy conservation.
Powerful acceleration.
Quick reversing without having to
“think”.
No carbon brushes – the traction motor
is maintenance-free.
Two-year warranty for the traction motor.
Smooth Raising and Lowering
The platform raises and lowers in a consistent and smooth process thanks to special modulation of the hydraulic pump and the valves. A rubber mat provides additional operating comfort. The advantages include:
Tangible relief for the driver.
Additional protection for sensitive loads.
Minimal wear through reduction in dynamic stress.
Travel in comfort
The Jungheinrich SpeedControl system provides comfortable, precise control of the travel speed:
The speed indicated by the travel switch
is maintained in every situation. By programming the traction controller to suit the application at hand, sensitive shunting is possible even at low speeds.
Adjustable travel parameters (e.g. acceleration,
limit speed, motor brake) allow you to tailor the truck to your individual requirements.
The operator can choose from 3 different
travel programs.
Very low noise levels when lifting and
travelling. Driver display
High level control instrument for displaying the most important operational data:
Travel direction and wheel position display.
Battery status with residual charge display.
Selected travel program with performance
features.
Hour meter/time.
Comfortable control unit

The inclined steering wheel supports
the natural hand movement and avoids straining the wrists.
Easily accessible buttons and travel
switches allow you to operate the truck in comfort with minimum hand movements. High levels of efficiency and safety
High acceleration levels and fast travel / lift speeds provide the best conditions for orderpicking performance. A range of active and passive performance features provide the necessary degree of safety:
Secure bend handling through lowlying
centre of gravity.
Steel supports for extra tipover protection
in extreme situations.
Outstanding use of maximum permissible
travel speed through a combination of lift height and steering angle dependent speed reduction. Less maintenance
Service-friendly components ensure that running costs are considerably reduced over the long term:
Maintenance-free AC drive motors without
carbon brushes.
Easy access to all units through easy
opening front/side panels and optimised layout of auxiliary hydraulics. Optional equipment

Provision for radio.
Pallet protection for walk-on load lifting
devices.
Guidance controls, aisle recognition
and end of aisle protection device for narrow aisle store applications.
Platform extensions.
Second operator position in fork direction.
Cold store version.
Work lights on overhead guard.
Beacon on overhead guard.