Post Inquiry
You are here:Home > Products > Forklift Truck > Special Forklift > Rough Terrain Forklift > Description

Agria 1.6T Rough Terrain Forklift TH-15.16

Agria 1.6T Rough Terrain Forklift TH-15.16

普通商家

Hot Recommend

Description

Parameters

Product Picture

ENGINE
Perkins, 3 cylinders, water cooled.
Power: 23,5 KW.
TRACTION
Constant traction on four wheel drive with security clutch. Electrohydraulic disconnection on the rear traction
TRANSMISSION
Full hydrostatic with two speeds engine and variable flow pump. Fwd-Rev and slow-fast change, controlled by electrical switch. Progressive automatic travel speeds from 0 to 9 Km/h, when slow; and from 0 to 21 Km/h, when fast. Slow approaching system by “Inching” pedal. Axles with epicicloidal reductions. Front axle with multidisc brakes in oil bath assembled before reducting.
STEERING
Hydrostatic, with priority valve and steering cylinder with double rod, integrated on the directional axle.
BRAKES
Double service brake system: Hydrostatic on the four wheels through the transmission. Multidisc type running in oil acting hydraulically by pedal, on the front axle. Parking brake: On service brake, with independent mechanical actions.
HYDRAULIC CIRCUIT
Twin gear type with max. Flow of 30 lit/min. and pressure of 180 bar. Mast leveling by “Joystick” system.Controlled descent check valve and pitch compensating valve. Anti-falling valve. Submerged oil filter. Filling hole with level rod. Oil tank of 20 lit.
ELECTRICAL EQUIPMENT
Alternator of 55 A. • Battery of 12V-75A
Lightening and signalization as current regulations. Rear speed acustic warning device and headlight turning.
PANEL BOARD
Integral dashboard with r.p.m, temperature and fuel level indicators. Control pilot lamp for the remainning functions. Working hour counter, control for light changing, intermittents and horn. Buttons for warning and headlight turning.
DRIVING PLACE
Ergonomic platform assembled over mufflings.Total view. Lateral type levers. Dumping type seat adjustable depending on driver’s weight with displacement control.
BODYWORK
Folding cover with access to all elements of the engine, transmission and gear box to make easy the maintenance.
WHEELS
2WD: Front: 10,5/75-15,3 (10 PR)
Rear : 8,0/75-15,3 (6PR)
NET WEIGHT
2.950 kgs.
LOAD CAPACITY
1.600 kgs.
MAXIMUM GRADABILITY
38%
STANDARD EQUIPMENT
Duplex mast of 3,14 mts. raising.
Panel FEM II of 1.000 mm width
with lateral offset included.
Forks of 100x40x1000.
OPTIONAL EQUIPMENT
Duplex and triplex mast with raising until 6 mts. high.
- Loading shovel of 400 lit.
- 4th auxiliar hydraulic take off - Cabin.