Post Inquiry
You are here:Home > Products > Forklift Truck > Special Forklift > Wood Clamp Special Forklift > Description

GEHL 3935 Wood Clamp Special Forklift 3935

GEHL 3935 Wood Clamp Special Forklift 3935

普通商家

Hot Recommend

Description

Parameters

Product Picture

With the model 3935 you get excellent fuel efficiency, lower noise levels than previous models and a lift capacity up to 1,360 lbs. A naturally-aspirated, high-torque engine puts out 36 hp with top speeds up to 7 mph. A narrow frame provides unmatched maneuverability, allowing the 3935 to operate in the most crowded spaces!
GENERAL*
Overall Operation Height – fully raised (mm)
Height to hinge pin – fully raised (mm)
Overall height with operator guard (mm)
Ground clearance to chassis – between wheels (mm)
Overall length (mm)
Overall length – less bucket (mm)
Wheel base (mm)
Dump reach – Full height (mm)
Rollback at ground
Dump angle – Full height
Overall width – Less bucket
(Tire in/Tires out position) (mm)
Bucket width (mm)
Clearance circle – rear (mm)
Clearance circle – front less bucket (mm)
Clearance circle – front with bucket (mm)
Seat to ground height (mm)
Rollback at full height
Dump height (mm)
Departure angle
Tires

ENGINE
Make
Model
Net power @ rpm (kW)
Displacement (L)

HYDRAULIC SYSTEM
T-bar Hand controls, Hand/Foot controls,
or Dual-Hand controls
Auxiliary hydraulics (L/min)
Filtration
Reservoir capacity (L)


ELECTRICAL SYSTEM
Battery
Starter
Alternator

CAPACITIES/WEIGHTS
SAE Rated operating load (kg)
SAE Rated operating load w/optional weight kit (kg)
Fuel tank (L)
Travel speed (km/h)
Operating weight (kg)**                                        
*  All measurements w/std. flotation tires & std. dirt bucket
**  Base units w/std. equipment, tires, bucket & 175 lb. (79 kg) operator




141.8” (3600)
110.0” (2797)
72.3” (1835)
8” (203)
117.9” (2995) w/60” bucket
90” (2285)
36.3” (922)
25” (635)
28°
36°

52”/58” (1318/1475)
61” (1549)
53.8” (1367)
43.2” (1097)
71.1” (1806)
35” (889)
100°
86.5” (2197)
26°
10.00x16.5


Yanmar
3TNV88
36 hp (27) @ 3000
100 cu.in. (1.64)



Traction/Lift/Tilt
14.4 gpm (55)
7 micron
8 gal. (30.3)


12-Volt (675 CCA)
12-Volt
40-amp


1260 lbs. (57)
1360 lbs. (617)
8.5 gal. (32.2)
0-7 mph (0-11)
4600 lbs. (2087)