The EJC B14/B16 is mainly designed for the flexible handling of perimeter based pallets and special loads. Due to its widened support arms and forged forks that can be lowered down to the floor, it can go underneath the load during pick-up. Perimeter board pallets can therefore be picked up crossways as with a ounterbalanced stacker.

The powerful 3 kW lift motor can easily manage any type of load. Due to its solid and rigid construction, the EJC B achieves high residual capacities up to 5350 mm lift height. The rigid and contoured 8 mm chassis protects against knocks and collisions.

The support arms and FEM forks are adjustable and allow the handling of various loads and pallet sizes. 4-point wheel contact and the widened solid steel support arms, ensure excellent stability and
high residual capacities.

The low-mounted long tiller provides a large safety distance from operator to truck. If space becomes tight, a press on the crawl speed button is sufficient for manoeuvring the EJC B with the tiller in an upright position. The side mounting of the tiller always provides unobstructed visibility towards the load.

The EJC B is equipped with proportional hydraulics. This allows fragile goods to be stacked precisely and deposited softly on the floor or in the racking. The operator controls all hydraulic functions with the multifunction tiller head without having to reach round.

Powerful and robust
The powerful 1.5 kW shunt-wound drive motor (EJC B14: 1.3 kW) has a high load carrying ability with high power reserves. In combination with the robustly constructed chassis and rigid mast, the truck is ideally suitable for heavy loads and high throughput. Other advantages:
Fast lifting times even with full load due to a strong 3 kW lift motor.
Two year warranty on drive motor.

The EJC B 14 during stacking manoeuvres. Flexible and safe operation
The EJC B with its FEM fork carriage is suitable for many applications and for adapting to different loads: from forged forks with various lengths and dimensions to fitting attachments with, for example, hydraulic functions (optional). Other advantages:
Excellent stability during travel due to sideways extendable support arms (900–1350 mm).
The operator remains safely within the truck contours during travel in drive direction.
Comfortable travel
The Jungheinrich electronic impulse control (SpeedControl) gives smooth, safe travel adjustable to every application:
The required speed will be maintained in every travel situation – on both up and down gradients. The top speed of 6 km/h is also maintained with full load.
Regenerative braking during deceleration.
Individually adjustable travel parameters tailors the truck to every application.
Low noise level during travel.

ProTrac support wheel for excellent traction on flat as well as uneven floors Safe and comfortable stacking
All lifting and lowering functions are comfortably controlled by the multifunction tiller head without having to reach round. The operator can therefore fully concentrate on stacking and retrieval. There are other performance characteristics that make stacking and retrieval particularly safe and cost-effective:
Precise and sensitive lifting and lowering due to proportional hydraulics.
Long safety tiller for adequate safety distance between operator and truck.
Crawl speed button for manoeuvring in tight spaces with tiller in upright position.
Jungheinrich support wheel ProTrac: excellent traction also on uneven floors.
Plenty of convenient storage areas

Pencil mould and paper holder
Document compartment on front cover (optional)
Long application times

Two chassis designs for batteries up to 270 Ah (3 EPzS 240/270) or 375 Ah (3 EPzS 345/375) for long operational times.
Battery changing is carried out vertically
Additional equipment

Cold store version
Access authorisation via CanCode